{"product_id":"sony-microphone-mount-07-21-tundra","title":"Sony Microphone Mount | '07 - '21 Tundra","description":"\u003ch2\u003eSONY MICROPHONE MOUNT FOR YOUR TUNDRA\u003c\/h2\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWe are proud to offer you a solution for mounting your Sony aftermarket microphone in your 2007 – 2021 Tundra\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eheadliner console.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis allows your new microphone to be neatly tucked away in the headliner console and maintains the level of voice clarity and function you expect.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eInstallation Steps\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003col data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong\u003eRemove Headliner Console. \u003cbr\u003e\u003c\/strong\u003eDepending on trim level this may vary slightly.- If you have a sunglasses compartment, flip open the compartment and remove the 2 T20 torque screws.- Use a plastic pry tool to remove the panel containing the card holder clip. Underneath you will find 2 more T20 torque screws.\u003cbr\u003e\u003cbr\u003e- \u003cstrong\u003eFor 2007-2013\u003c\/strong\u003e Tundra follow the video below:\u003cbr\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/TvaF1QvBZ5Q?si=gW-iJxqgaCU8dGMs\u0026amp;start=385\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e - \u003cstrong\u003eFor 2014-2021\u003c\/strong\u003e Tundra follow the video below:\u003cbr\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/PwR5s2YKIS8?si=NmMDyotnnA9rM4nU\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove Headliner Console Wiring Harness.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eUnplug harness connector.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove Foam Insert.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eLocate microphone port and remove the foam insert.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRemove Mounting Ball On Sony Microphone.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe small ball can be removed easily by cutting with a pair of side cutters or a utility knife.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall Microphone To Mount.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ePush the rounded end of the microphone thru upper support of the mount. The rounded end of microphone should be very close to in line with the bottom of the 2 legs on mount. Align the spot where you cut off the ball to be in-line with one of the upper supports. This will make sure the audio openings on the side of the microphone are not obstructed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eInstall Sony Microphone Mount.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eInstall mount into headliner console. Insert mount (legs \u0026amp; rounded end of microphone facing down) until the clip locks into place.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eRoute Microphone Wire.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eStart by routing microphone wire from headliner console area through headliner towards rearview mirror. At this point, you can re-install the headliner console. Be sure to pull excess slack toward the rearview mirror while installing headliner console. Continue routing the wire along the top of the windshield toward the driver side A pillar. Tuck the wire behind the A pillar cover and route down the A pillar toward the driver’s floorboard. Run the wire under the dash area and finish by routing the 3.5mm jack to the back of your new Sony Bundle. Connect the 3.5mm jack into the red mic port on the rear of the Sony radio chassis.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eTest Functionality.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eTest functionality after making all required connections.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Trail Grid Pro","offers":[{"title":"Default Title","offer_id":51773890330840,"sku":"TGP-AM-MIC-TUN","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6947\/0936\/files\/TGP_SonyTundraMicMount-6.jpg?v=1780461864","url":"https:\/\/www.bmmautosports.com\/products\/sony-microphone-mount-07-21-tundra","provider":"BMM Autosports","version":"1.0","type":"link"}